4 Alternatives to the HITBOX 200A Aluminium TIG Welder (Including Better Value Picks)

If you want the closest budget-friendly alternative, the 200AMP TIG & MMA/ARC/Stick 2 in 1 DC Inverter Welder is the strongest value pick at £219.99. It’s cheaper than the HITBOX by about £80 and has a better review score (4.6★ vs 4.2★), plus HF arc start and a high 60% duty cycle. The trade-off is that it’s DC only, so it cannot TIG weld aluminium properly in the same way an AC/DC machine can. Choose this if you mainly weld mild steel, stainless, fabrication work, and want a reliable TIG + stick machine without paying for aluminium-capable AC output.

If you want a more premium all-rounder, the H HZXVOGEN TIG Welder AC/DC 200A with Pulse is the closest direct rival to the HITBOX, but more expensive at £399.99. It offers AC/DC, pulse, square wave, stick, 2T/4T, and 6-in-1 functionality, so feature-for-feature it looks stronger on paper. The main advantage is flexibility: it’s better suited to users who want more control over aluminium work and more process options in one unit. The downside is price, since it costs around £100 more than the HITBOX. Pick this if you want a more fully featured AC/DC TIG machine and don’t mind spending extra for broader capability.

The Cut 40 Inverter Plasma Cutter with inbuilt air compressor is not a TIG welder alternative in the strict sense, but it is a smart alternative if your real need is cutting rather than welding. At £259.99, it sits between the cheaper DC TIG and the HITBOX, and the built-in compressor makes it much more self-contained for site or garage use. It’s better for cutting steel plate, sheet, and fabrication prep, especially where portability matters. What it cannot do is weld, so it only makes sense if you were considering the HITBOX partly for metalworking versatility rather than TIG welding alone. Choose this if cutting tasks are more important than joining tasks.

The AZZUNO 200A TIG Welder with Pulse Cold is another good-value option at £288.62, slightly cheaper than the HITBOX and with a decent 4.1★ rating. It’s a 5-in-1 DC machine with dual voltage support, so it’s more flexible for users moving between different power supplies, and it includes TIG/pulse TIG/cold/spots TIG/stick modes. The main limitation is again the DC-only design, which means it is not the right machine if aluminium AC TIG is a must. Compared with the HITBOX, it’s a better choice for mixed-voltage users and general steel welding, but worse for aluminium-specific work. Pick it if you want broader input-voltage compatibility and don’t need AC output.

Overall, the HITBOX remains attractive if you specifically need AC/DC aluminium TIG in a mid-priced inverter package. But if your work is mostly steel, the DC alternatives offer better value; if you want more advanced AC/DC features, the HZXVOGEN is the step-up option.